Access control with fingerprint reader can be integrated into buildings

International. The BioEntry W2 fingerprint reader from Bosch Security Systems is an IP-based fingerprint access control for indoor and outdoor installation with two-factor authentication (fingerprint and card).

The reader can be connected via OSDP or Wiegand to an AMC2. In addition, it is possible to configure a random reader as a log reader.

For installation, the maximum cable length for the OSDP/RS485 bus system must be 1200 m with twisted cable pairs. It is possible to connect a maximum of eight readers per interface.

Addresses are assigned to the reader using the optional configuration tool. In order to avoid problems when reading cards on contactless card readers, the installer should follow the instructions when planning and installing contactless readers.

Santiago JaramilloEmail: [email protected]

Editor

Comunicador social y periodista con más de 15 años de trayectoria en medios digitales e impresos especializados para América Latina. Actualmente Editor de las revistas Ventas de Seguridad, Gerencia de Edificios y Coordinador académico del Congreso TecnoEdificios.

• TecnoEdificios evidenced consolidation of the industry
• New cleaning dynamics with Green Cleaning 3.0
• Johnson & Johnson Offices Earn LEED Platinum Certification
• Utilities and energy efficiency: increasingly linked
• Mitsubishi Electric VRF systems for an efficient hotel